DIY - Hanging Leather Planter {from a tote!}

Whew! Well we just sailed to Friday, didn't we here. I thought I'd have some more goodness to show you this week but wouldn't you know it, in a span of 5 days we lost AC, hot water, and our washing machine was down. All issues were quickly resolved within a few days and I was so reminded of how extremely fortunate we are that those were our challenges this week. Needless to say, these hiccups put a hold on some of the week's to-do's, (a familiar story to all, I'm sure).

But, I was able to finish one sweet thing to share with you before the weekend!

Hanging Leather Planter

This was one of those quick satisfaction projects. The kind that doesn't suck a whole lot of time or energy from you, but the result is exactly what you had hoped and pictured. Those are so necessary sometimes, yes? I found this camel leather tote last week at a thrift store for less than $8.

If you're into accessories this would be an awesome find! I used to be an accessories girl. Then I had a bunch of kids and they became my accessories... Funny how that happens! I still know a good deal on leather when I see it, though.

I actually bought this tote just to use it for it's leather. The hanging planter is just the first project to come from it, but I've got another that I'm looking forward to sharing soon as well! The first thing I did was lay the tote front-side-down, (with that cute pocket facing the floor), and stick my plant right in the middle of the backside. I needed to make sure that what I cut from the tote would be enough to securely hold my plant, which is on the larger side. Then I set the plant aside, took out a strong pair of scissors, and cut along the perimeter of the tote. I removed and relocated the shoulder straps and the braided pieces along the sides to use for hanging the piece. That's it folks!

The last piece was how to hang my planter. I chose a brushed nickel closet rod hook from Home Depot for $6 because I wanted the plant to hang away from the wall a bit, but there are of course other options depending on where and how you want to see your plant hanging, (from the ceiling, closer to the wall, etc).

If you're fired up to try this yourself, just know that the process and end result will look a little different depending on the bag you use. That's the fun of it, though! I would recommend finding a bag with long-ish shoulder straps so you can cut them down to use for hanging the piece. This is just a simple idea with which to expand on and make it your own! If you happen to try it out please hashtag #chelseasgarage on Instagram or feel free to share photos on Facebook! We LOVE seeing your handiwork!

Thank you all for stopping by and have a splendid weekend!

~Chelsea

This post was published under Chelsea's Garage, now affectionately known as StyleMutt.

Nursery Themes Using Engineer Prints

Why hello there!  As some of you may already know, last month I shared how to make a faux pull-down chart from an engineer print.  Well since then it has become increasingly more obvious {mainly to my husband because they're multiplying in our home} that I am OBSESSED.  I mean, have you noticed how I've been sneaking them in to all my post pictures lately...?

Like here

annnnnnd couldn't help myself here either

Can't stop won't stop.  I simply must share some more...

So because they give such a strong nod to those vintage school house pull-down charts, I can't help but feel they would be so cute for kids!  You can so easily 

do something custom, cute, cheap, and even educational for any baby's nursery theme {not that Caleb and I are looking for ideas - just because we're married and I mentioned the word baby doesn't make me pregnant people.}  ;)

I mean, couldn't you see this vintage car print in a boys room?

Source:  The Graphics Fairy

How about this sweet alphabet print?

Source: Just Something I Made

Source: Just Something I Made

Are you seeing the potential yet?  Maybe this will help...

This hot air balloon print could take any nursery Up Up and Away...

How about a  sailing ship for your Little Sailor...

Or a noble stag to watch over your Woodland Adventurer...

The possibilities are endless!  I think that last one is my fave...  

Have another great idea for these cheap black & white engineer prints?  We'd love to see how you do it!  Tag us in your projects #ChelseasGarage!

Happy Wednesday ya'll,

~ Cate

This post was published under Chelsea's Garage, now affectionately known as StyleMutt.

Hello again, AT!

Hi friends! In case you missed my shameless bragging on Facebook over the weekend, our very own Cate made a splash over at Apartment Therapy a few days ago! Her Geometric Lamp Copycat was all the buzz at AT as one of their Before & After features. Way to go, Cate!

Good choice, Apartment Therapy. Good choice, indeed.

To the thousands (!!) of new readers checking out Chelsea's Garage for the first time, we are so excited you found us! We're a DIY, Home Decor, Furniture refinishing blog, started by me, Chelsea, and featuring weekly editions by my very talented sister-in-law, Cate!

We are both so glad you're here and hope you look around through our many tutorials and projects, enjoy yourselves, and definitely stick around; Cate and I are cookin' up something big that we definitely want you to be a part of. Stay tuned!

And as usual, you'll be hearing from Cate tomorrow with an inspiring Wednesday edition! I'll be back soon to share how I turn one leather tote bag into both a hanging planter and leather drawer pulls, (now that's one amazing tote)!

Thank you so much for stopping by!

~Chelsea

This post was published under Chelsea's Garage, now affectionately known as StyleMutt.